BGS

for feeding of drive shafts into the wheel hubbased in a standardized industrial wheel bearingcontai..

249.58€

suitable for BGS 3246without retaining ring..

95.92€

for loosening / tightening the goove nut on MAN TGA 460 axles, V9-82L-01 (disk brake / ABS)suitable ..

693.88€

for removing the drive shaft from the front axlesuitable for 4WD BMWmakes disassembly much easierdip..

83.92€

used to push drive axles out of the automatic transmissionsuitable for six speed automatic transmiss..

167.94€

with groove and hole for retaining ball12-point socket, 12.5 mm (1/2") drive: 27 - 30 - 32 - 34 - 36..

153.54€

with groove and hole for retaining ball12-point sockets, 12.5 mm (1/2") drive: 30 - 32 - 36 mmbit so..

122.34€

for loosening and tightening the drive shaft nut on the drive shaftsuitable for drive shaft nuts on ..

110.32€

for locking the drive sprocket of the high pressure pumpis required when adjusting the valve timings..

43.10€

for locking the drive sprocket of high the pressure pumpis required when adjusting the valve timings..

47.90€

for pulling off the drop arm from steering box on Land Rover Defenderalso suitable for drop arms whi..

139.14€

for rotating the clutch caserequired when removing or installing the clutch casesuitable for BMW DKG..

290.40€

for removing and installing dual clutchessuitable for Getrag 6-speed dual clutch transmission with c..

333.62€

required for repair of the clutch unitsuitable for following modells:VW Golf (2004), Golf Plus (2005..

420.06€

protection class: FFP1subject to the regulations: EN 149:2001 + A1:2009without valvematerial: non-wo..

11.88€