- one-component, waterproof and paintable seal material for horizontal and vertical surfaces
- suitable for different areas, such as roofs, walls, wet cells, vehicles
- for vehicles as underbody protection and as a spreadable joint sealing
- waterproofing for roof lights, skylights, gutters, pipe junctions, wall connections, chimney connections, outdoor ventilation, cracks and fractures in masonry, etc.
- suitable for substrates such as Styrofoam®, plastics, concrete, wood, stone, metal, sanded roofing felts
- UV resistant and not sensitive to rain and spray water (even during curing)
- adheres to old and wet surfaces
- outstanding resistance to chemicals
- no subsequent stickiness on the surface
- excellent workability, only 2 coats are necessary
- colour: grey
- consistency: low-viscosity, pasty
- viscosity PP25, 11/s: 10 - 30 Pa.s
- hardens at room temperature
- spec. weight: 1.4 g/cm3
- skin formation 23 °C / 50% rel. humidity: 20 - 40 minutes
- hardening time: approx. 3 hours (1 mm layer thickness)
- processing temperature of: +5 °C to +40 °C
- temperature resistance of: -40 °C to +90 °C (when hardened)
- water vapour permeable
- consumption
approx. 1.3 kg/m² at approx. 1mm application thickness
approx. 2.1 kg/m² at approx. 2mm application thickness with fleece